[1]李忠玉.高速铁路路肩结构的施工方法创新分析[J].高速铁路技术,2019,10(02):100-104.[doi:10.12098/j.issn.1674-8247.2019.02.021]
　LI Zhongyu.Innovative Analysis on Construction Method for Shoulder Structure of High-speed Railway[J].HIGH SPEED RAILWAY TECHNOLOGY,2019,10(02):100-104.[doi:10.12098/j.issn.1674-8247.2019.02.021]
点击复制

高速铁路路肩结构的施工方法创新分析()
分享到：

《高速铁路技术》[ISSN:1674-8247/CN:51-1730/U]

卷:
10卷
期数:
2019年02期
页码:
100-104
栏目:
施工技术
出版日期:
2019-04-28

文章信息/Info

Title:
Innovative Analysis on Construction Method for Shoulder Structure of High-speed Railway
文章编号:
1674—8247(2019)02—0100-05
作者:
李忠玉
中铁十九局集团有限公司, 北京 100176
Author(s):
LI Zhongyu
China Railway 19 th Bureau Group Co., Ltd., Beijing 100176, China
关键词:
高速铁路|路肩|结构|创新|施工方法
Keywords:
high-speed railway|shoulder|structure|innovation|construction method
分类号:
G312
DOI:
10.12098/j.issn.1674-8247.2019.02.021
文献标志码:
A
摘要:
高速铁路路基电缆槽采用的钢筋混凝土在工厂预制，待路基基床表层施工完毕后，采用切割的方法把路肩位置填筑好的路基表层填筑体去除，然后再在切割面上施工电缆槽和路基护肩。路基表层填筑材料为级配碎石，由于其强度较大，造成切割困难、效率低、影响环境等问题。针对这些问题，本文通过研究，提出了高速铁路路基电缆槽及护肩结构新的施工方法，解决了传统施工存在的技术问题，对工程实践具有重要的借鉴意义。
Abstract:
The reinforced concrete for cable groove of high-speed railway subgrade is prefabricated in the factory. After completion of the surface layer construction of the subgrade, the filling body of the surface layer of the subgrade at the filling position of the shoulder is removed by cutting method, and then the cable groove and the shoulder of the subgrade are constructed on the cutting surface. Because the surface filling material for subgrade is graded crushed stone with high strength, the cutting construction is difficult and the efficiency is low, and it has a large impact on environment. In view of these problems, through the analysis of innovative methods, this paper puts forward new construction methods-subgrade cable groove and shoulder protection structure-for high-speed railway. It solves the technical problems due to traditional construction, and has important reference significance for engineering practice.

备注/Memo

备注/Memo:
作者简介:李忠玉(1973-),男,高级经济师。引文格式:李忠玉. 高速铁路路肩结构的施工方法创新分析[J].高速铁路技术, 2019, 10(2):100-104.LI Zhongyu. Innovative Analysis on Construction Method for Shoulder Structure of High-speed Railway[J].High Speed Railway Technology,2019,10(2):100-104.
更新日期/Last Update: 2019-04-28