[1]唐强.CTCS-2级列控系统车站补充发码电路设计技巧[J].高速铁路技术,2022,13(02):76-79.[doi:10.12098/j.issn.1674-8247.2022.02.015]
　TANG Qiang.Design Technique of Supplementary Code Sending Circuit for CTCS-2 Stations[J].HIGH SPEED RAILWAY TECHNOLOGY,2022,13(02):76-79.[doi:10.12098/j.issn.1674-8247.2022.02.015]
点击复制

CTCS-2级列控系统车站补充发码电路设计技巧()
分享到：

《高速铁路技术》[ISSN:1674-8247/CN:51-1730/U]

卷:
13卷
期数:
2022年02期
页码:
76-79
栏目:
出版日期:
2022-04-28

文章信息/Info

Title:
Design Technique of Supplementary Code Sending Circuit for CTCS-2 Stations
文章编号:
1674—8247(2022)02—0076-04
作者:
唐强
中铁二院工程集团有限责任公司, 成都 610031
Author(s):
TANG Qiang
China Railway Eryuan Engineering Group Co., Ltd., Chengdu 610031, China
关键词:
列控系统|侧向发车进路|补充发码|电路设计
Keywords:
train control system|side departure route|supplementary code sending|circuit design
分类号:
10.12098/j.issn.1674-8247.2022.02.015
DOI:
10.12098/j.issn.1674-8247.2022.02.015
文献标志码:
A
摘要:
对于采用25 Hz相敏轨道电路的CTCS-2级列控系统车站,当区间第一离去区段(1LQG)长度较短,不满足动车组侧向发车运行对有码区长度的要求时,需采取补充发码措施。针对这一问题,本文以某典型车站为例,详细介绍了在既有电码化电路基础上完成补充发码电路的设计技巧和实施方案,可为其他线路类似运营场景的列控补充发码设计、实施提供重要参考和借鉴。
Abstract:
For CTCS-2 stations with a 25 Hz phase-sensitive track circuit, when the length of the first departure section (1LQG) in the section is relatively short so that can’t meet the requirement of the length of the code area for the side departure operation of the multiple units, it is necessary to take supplementary code sending measures. To solve this problem, this paper took a typical station as an example and introduced in detail the design technique and implementation scheme of the supplementary code sending circuit based on the existing code sending circuit. The results can provide an important reference for the design and implementation of the supplementary code sending circuit for train control in similar operation scenarios of other lines.

备注/Memo

备注/Memo:
作者简介:唐强(1984-),男,工程师。引文格式:唐强. CTCS-2级列控系统车站补充发码电路设计技巧[J]. 高速铁路技术, 2022, 13(2):76-79.TANG Qiang. Design Technique of Supplementary Code Sending Circuit for CTCS-2 Stations[J]. High Speed Railway Technology, 2022, 13(2):76-79.
更新日期/Last Update: 2036-04-28